Need advice on removing front bumper cover/grille

Discussion in 'Renegade Modified Tech' started by Corrupt_Reverend, Apr 28, 2018.

  1. Corrupt_Reverend

    Corrupt_Reverend Member

    Joined:
    Oct 2, 2017
    Messages:
    62
    Location:
    California
    So I'm installing the Avid Contour bumper today, but have hit a snag.

    I've followed all the guides available and I'm at the point where I should be able to remove the bumper cover and grille in one piece.

    The hangup is that the filler panel between the bumper cover and the fender will not budge. I saw a post where someone else had the same issue and they posted a picture of a couple clips that weren't mentioned in the guides, but I'm still not getting how the damn thing comes off.

    if anybody has some insight, I'd be greatly appreciated.

    Edit: Figured it out. Also, I'm shooting a how-to video for the entire process so other people don't have to deal with figureing it out.
     
    Last edited: Apr 28, 2018
    Dgr401 and Cody Stephens like this.
  2. Corrupt_Reverend

    Corrupt_Reverend Member

    Joined:
    Oct 2, 2017
    Messages:
    62
    Location:
    California
    Never mind. Just had to pull harder.
     
  3. Thatguy178

    Thatguy178 New Member

    Joined:
    May 8, 2018
    Messages:
    29
    Location:
    Illinois
    Im about to actually install this bumper in a few days have you shot that video yet? And if not what other clips are you talking about. Thanks
     
  4. Corrupt_Reverend

    Corrupt_Reverend Member

    Joined:
    Oct 2, 2017
    Messages:
    62
    Location:
    California
    All the footage was saved on internal memory so I have to swing by my friends place to pick up the camera cable. Video should be up this weekend.
     
  5. Thatguy178

    Thatguy178 New Member

    Joined:
    May 8, 2018
    Messages:
    29
    Location:
    Illinois
    Thank you this will help me out alot.
     

Share This Page