I have the WeatherTech wind deflectors on my 2016. They're optically correct... don't distort things when you look through them. No adhesive tape...
I went with the Madness GoPedal. Huge difference in throttle lag, especially starting off. Lots of adjustment. I installed a K&N intake. Gets loud...
Plus you've got an extra 100HP... Jealous!!
FYI, I think there is programming required to get the body computer to recognize the trailer hitch wiring harness. Dealer charge involved. I'm...
No problems with my Avid 2" (non-heim) end links.
I 2nd the Avid thumbs up! I installed the 2" kit. Included the adjustable control arms (forward dif to spindle in the rear). Excellent offsets...
That outta get you a good "Ruth Christ" sear on you steaks by the time you get home!:D
Mine was pretty close after I installed my Avid 2" kit. They do a good job with the offsets on their spacers to keep you close to OE spec. In the...
Nice!
These are +30 offset. They also make the with a +40 offset... [ATTACH]
Mayhem Wheels click here.
Sorry, didn't see the Mayhem Warrior's 17x7.5, 5x110, +40mm offset!
Avid shows a 29.5" OD with inner fender mods for the 1.5" lift kit. 245/65R17 = 29.5" OD, 255's 30.1" OD. My rubbing is at the back of the front...
So you're at 29" OD, no lift and 1.5" spacers. If you're OK now, should be OK with the 1.5" lift and 2" spacers. I'm running 245/70R16's (29.5"...
Depends on your wheel/tire size. Rears should be no problem. 2" spacers on the front widen the arc as the wheels turn lock-to-lock. Could be fine...
It's no so much about the speedo being off by a few MPH. You can compensate for that. Long term, your odometer will be off (lower). It will show...
Saw a guy on YouTube do this on his Ram, click here. AlfaOBD App ($49 - Google Play) is similar to Multiecuscan and accesses the vehicle computer...
I went with 245/70's, but downsized the rims to 16" (29.5 OD on the 16's vs 30.5 OD on the 17's). After pinch weld mods with 1" spacer, got some...
Mine were super tight. Spray some lube and Michael Jackson it (Beat It).
Separate names with a comma.